How To Attach Swiffer Duster

Swiffer dusters are a convenient way to keep your home tidy without having to bend and stretch every time you need to clean under furniture. If you don’t have anywhere in your home where you can store your Swiffer duster, attaching it to the handle will help with storage and prevent accidents. Keeping the Swiffer duster with your vacuum also prevents losing it!

This article will show you how to attach a Swiffer duster onto a standard vacuum cleaner. You can also follow these steps if you want to hang your duster from a hook or another part of your house instead of hiding it away. If you already own a vacuum with an extended handle, then this task should be simple for you. Otherwise, keep reading for details on what tools and supplies you will need for this project.

What You’ll Need

There are a few items you will need for this project. They include:

  • A drill and drill bit: This is the tool you will use to make pilot holes for the screws.
  • A screwdriver: You will need this to tighten the screws once you’ve finished installing your holder.
  • A swivel duster: If you are attaching a Swiffer duster or dust mop, then you can use this guide to attach it.

Any other tools that you may need to remove your vacuum cleaner’s handle if it is current attached with screws.

If you are using a Swiffer duster, you will also need a screwdriver to remove the duster holder from the vacuum. This is not included in the original packaging. Make sure to put the original holder back after you are done with the project!

How To Attach Swiffer Duster To Swiffer Sweeper

To attach the Swiffer Duster to the Swiffer Sweeper, first remove the dusting cloth from the duster. Next, align the two notches on the duster with the two tabs on the sweeper. Finally, push down on the duster until it snaps into place.

How to Attach Swiffer Duster to a Vacuum

Step 1: Mark and Drill Pilot Holes

Before you screw the duster holder into your vacuum, you need to mark and drill holes where the screws will go. Make marks on the inside of the vacuum handle where you want the screws to go, then drill pilot holes where you made marks. Make sure that the screws are long enough to fit into the duster holder, but short enough so that they don’t go through the other side of the vacuum handle. Once you’ve finished marking and drilling, you can move onto the next step.

Step 2: Install the Duster Holder and Screws

Put the duster holder back into the vacuum, lining up the marks that you made in the previous step. Once the marks line up, you can screw the duster holder into place. Make sure that you screw the duster holder into place firmly. If you don’t use enough force, the holder may fall out the next time you vacuum. You may need to use a screwdriver to finish tightening the screws if you have a Swiffer duster. Make sure that you have the right size screwdriver for the job. If you are using a dust mop, these steps may be different. Once the duster holder is in place, you can move on to the next step.

Step 3: Install the Swiffer Duster

The last step is to install your Swiffer duster or dust mop. You can do this by putting the duster over the holder and then screwing the duster into place. Make sure that you are using a screwdriver with a flat head, especially if you have a Swiffer duster. If you have a Swiffer duster, make sure that the same end you used to put the holder on the vacuum goes on the duster. Otherwise, the duster may not fit onto the holder properly. Once you’ve finished, you can put the vacuum away.

Conclusion

Swiffer dusters are a convenient way to keep your home tidy without having to bend and stretch every time you need to clean under furniture. There are a few items you will need for this project like a drill, a drill bit, a screwdriver, a swivel duster, and any other tools that you may need to remove your vacuum cleaner’s handle if it is current attached with screws.

If you already own a vacuum with an extended handle, then this task should be simple for you. Otherwise, keep reading for details on what tools and supplies you will need for this project. Once you’ve finished this project, you can put your vacuum away, but don’t forget to use your Swiffer duster every once in a while!

Leave a Comment