How To Clean Ashes Out Of Solo Stove

If you’ve ever owned a wood-burning stove, then you know the clean-up isn’t exactly straightforward. Ash is the byproduct of burning wood and it won’t disappear once your fire dies out. In fact, it can be quite messy. If you don’t take the necessary precautions before putting away your Solo Stove or any other wood-burning device, then you might find yourself covered in ashes come this time next year. Rest assured: cleaning up after using a wood-burning appliance isn’t as challenging as it sounds. Below are some helpful tips on how to clean ashes out of a Solo Stove.

How To Clean Ashes Out Of Solo Stove

What You’ll Need

  • Shop Vacuum: This will help you suck up ashes and dust from the inside of the stove.
  • Wire Brush: The bristles on a wire brush are flexible enough to bend and scrape off ashes from different surfaces.
  • Container: Some sort of container (i.e. a plastic bucket, metal pail, etc.) to place the ashes in.
  • Cloth: You can use a cloth to wipe off any larger ash particles.

Step 1: Turn Off The Burner

Turn the knob to the “off” position to discontinue the flow of gas. This will ensure the flames stop feeding on the fuel source and the fire dies out entirely. – If your stove has a piezo ignition, go ahead and push in the button. Doing so will apply pressure to the burner and extinguish the flame.

Step 2: Remove The Lid And Drip Tray

Using a wrench, loosen the knob on the lid. This will allow you to lift the lid and remove it from the stove. Next, lift up the drip tray and set it to the side. – Using a Shop Vacuum, suck up any ashes and dust still in the stove. You may have to remove and shake out the Shop Vacuum’s bag from time to time.

Step 3: Use A Wire Brush To Scrape Off Any remaining ash

Using a wire brush, brush off any remaining ash particles that might be stuck to the stove’s walls.

Step 4: Use A Wire Brush To Scrape Off Any remaining ash

Using a wire brush, brush off any remaining ash particles that might be stuck to the stove’s walls.

Frequently Asked Questions

How Do I Make My Solo Stove Shiny Again?

Abrasive cleaners (e.g. Brasso) can be used to clean and polish metal stove surfaces. First, clean the surface of the stove with a general-purpose cleaner to remove any dirt or grease. Then, apply a small amount of the abrasive cleaner to a soft cloth and rub it in a circular motion on the stove surface. Continue polishing until the stove is shiny. Be sure to rinse the stove thoroughly with water after cleaning to remove any abrasive cleaner residue.

How Do You Clean A Burnt Solo Stove?

To clean a burnt solo stove, start by scraping off any burnt material with a metal spoon or spatula. Then, use a wet paper towel or sponge to wipe away any remaining residue. Finally, rinse the stove with water and dry it off.

Conclusion

Once you’ve finished cleaning, close the lid and replace the drip tray. You might also want to wipe down the outer surface of the stove with a cloth. If there are any ashes stuck to the outside of the stove, you can use a cloth to wipe them off.

Now that you know how to clean ashes out of a Solo Stove, you’ll be better prepared for next time you decide to use the wood-burning appliance.

Leave a Comment