How To Clean Bissell Crosswave Brush

Bissell Crosswave is a multi-surface wet and dry vacuum cleaner. It can be used to clean carpets, floors, upholstery and stairs. The machine has a brush that helps in the cleaning process. The brush may get dirty over time and needs to be cleaned.

How To Clean Bissell Crosswave Brush

1. The first step is to remove the pod from the machine. This can be done by pressing the release button on the top of the machine and pulling it straight up. 2. Next, remove the brush cover. This can be done by pressing down on the two tabs on the front of the cover and pulling it straight off. 3. The last step is to remove the brush. This can be done by pressing down on the two tabs on the brush and pulling

A vacuum cleaner Bissell crosswave brush Water Shampoo Salt

  • Push down on the cover and slide it towards you to remove it. the brush is now
  • Remove the crosswave® machine from under the sink
  • Locate the brush cover on the front of the machine

-Remove the dirty water tank and unscrew the brush cover. -Remove the old brush and replace it with a new one. -Reattach the brush cover and replace the dirty water tank.

Frequently Asked Questions

How Do You Take The Bottom Of A Crosswave Apart To Clean It?

To take the bottom of a CrossWave apart to clean it, remove the screws on the bottom of the machine. There are six screws in total. Once the screws are removed, the bottom panel can be pulled off. The brushes and debris can then be cleaned out. Be sure to put everything back together correctly before use.

How Often Should You Change Bissell Crosswave Brush?

The Bissell CrossWave brush should be changed every three months.

How Do You Clean The Bissell Crosswave Pet Pro Brush Roll?

The Bissell CrossWave pet pro brush roll can be cleaned by spraying it off with water and allowing it to air dry.


To clean the brush on your Bissell CrossWave, you will need to remove it from the machine. You can do this by unscrewing the four screws that hold it in place. Once it is removed, you can clean it with a brush or your hands.

Leave a Comment