Bullets are a heavy metal that’s subject to corrosion in any sort of moisture. Fingerprints on bullets are one of the most common sources of rust and corrosion. That’s because fingerprints leave oils and sweat behind, which are perfect breeding grounds for rust. You might be wondering if there is a way to clean bullets from fingerprints. The answer is yes! You can remove fingerprints from bullet casings quite easily.
Fortunately, the process is fairly straightforward and doesn’t involve much risk or special materials. All you need is some WD-40, vinegar and hot water. If you prefer another cleaning method, we also have tips for using baking soda and lemon juice as cleaning agents for removing fingerprints from bullets. Read on for explanations of why this happens and how to clean it off in three different ways!
Why do Fingerprints Cause Rust?
Bullets are pure iron, which rusts quite easily when exposed to moisture. We don’t think of bullets as having a lot of moisture on them, but they’re often covered with fingerprints, so they can acquire plenty of moisture. Fingerprints aren’t just water, though. They’re mostly oil, sweat, and skin cells. And iron corrodes in those substances much more readily than it does in water.
There are two types of corrosion – rust and corrosion.
Rust is the oxidization of iron that results in red stains. It happens on the surface of the iron and is a form of corrosion. It is not harmful to the bullet and can be easily removed.
Corrosion is a breakdown of the iron that takes place inside the bullet. It is a chemical process that can happen on the surface of the bullet as well, but is more harmful. Corrosive corrosion happens when the bullet is exposed to a chemical that attacks iron.
How to Clean Bullets from Fingerprints
WD-40 is a solvent that can be used to remove fingerprints from bullets. It also happens to be a very good rust remover. You will need to spray the bullets with the solvent and then wipe them clean with a soft rag. Important Note – WD-40 is not meant to be ingested, so do not clean the bullets by eating them. Do not eat bullets.
Vinegar is well known as a cleaning agent. It’s not just for cleaning floors, though. You can also use vinegar to remove fingerprints from bullets. There are two ways you can go about this. You can soak the bullets in vinegar or wipe them with a vinegar-soaked rag. Important Note – Vinegar is corrosive, so do not leave bullets in vinegar for an extended period of time.
Baking soda is not just for baking cookies. It happens to be a very good cleaning agent for removing fingerprints from bullets. The trick is to mix baking soda with a bit of water to form a thick paste. Then, use a rag to apply the baking soda paste to the bullets and wipe them clean. Important Note – Baking soda is corrosive, so do not leave bullets in baking soda for an extended period of time.
Lemon juice has some cleaning power. It is slightly acidic, so it can be used to remove fingerprints from bullets. There are two ways you can go about cleaning bullets with lemon juice. You can wipe them clean with a lemon juice-soaked rag or you can soak them in lemon juice.
Important Note: Lemon juice is corrosive, so do not leave bullets in lemon juice for an extended period of time.
If you are worried about your fingerprints being on your bullets, there are a few things you can do to clean them off. You can use gloves, or you can wipe the bullets down with a clean cloth. You can also sand the bullets to remove any surface oils that may contain your fingerprints.