How To Clean Bunker Gear

When firefighters or emergency responders enter an environment where hazardous materials are present, they need to take precautions to protect themselves. One of the most important pieces of protective gear is bunker gear, which includes a coat, pants, boots, and gloves. To keep bunker gear functioning properly and to protect the wearer from potential hazards, it is important to clean it regularly. Bunker gear can be cleaned in a number of ways, but the most effective method is to use a commercial detergent designed

How To Clean Bunker Gear

Bunker gear, also known as turnout gear, is a type of personal protective equipment worn by firefighters. The ensemble typically consists of a coat, pants, boots, and gloves. The coat and pants are usually made of heavy-duty fire-resistant materials such as Nomex or Kevlar. Bunker gear must be kept clean in order to maintain its protective properties. There are several ways to clean bunker gear. One way is to machine wash it using a commercial washing machine.

Bunker gear typically includes an SCBA, a hood, a coat, pants, boots, and gloves.

  • Remove outer clothing layer
  • Wipe down gear with a cleaning chemical hang gear to dry
  • Hose off gear thoroughly
  • Check gear for any damage or obstructions

-Bunker gear should be inspected for damage and cleaned after each use. -Bunker gear should be cleaned using a degreaser and a brush. -The gear should then be air-dried.


Frequently Asked Questions

Can You Put Bunker Gear In Dryer?

Most firefighters will not put bunker gear in the dryer because it can shrink the gear and make it less effective when worn.

Can You Put Bunker Gear In A Dryer?

You can put bunker gear in a dryer, but you should not put it in a washer.

Can You Put Firefighter Gloves In The Dryer?

Yes, you can put firefighter gloves in the dryer. The heat will help to kill any bacteria or germs on the gloves and will also help to soften them up.


In The End

Bunker gear should be cleaned after each use. In order to clean bunker gear, the firefighter should first remove the soot and dirt with a brush. The firefighter should then wet the gear and soap it up. The firefighter should then rinse the gear off and let it air dry.

Leave a Comment