How To Clean Motor Oil Out Of Plastic Container

You’ve just finished changing your car’s oil, and you’re about to recycle the old oil container. But wait! There’s still some oil left in the container, and you don’t want to just pour it down the drain. What should you do?

Cleaning motor oil out of plastic containers is actually pretty easy, as long as you have the right supplies. In this article, we’ll show you how to clean motor oil out of plastic containers so you can recycle them properly.

How To Clean Motor Oil Out Of Plastic Container

Supplies You’ll Need

First, let’s go over the supplies you’ll need to clean motor oil out of plastic containers.

You’ll need dish soap, hot water, and an old rag or sponge. You can clean the inside of the container with almost any dish soap, such as Cascade or Dawn.

You’ll also need to have hot water on hand, since you’ll be rinsing the container out a few times.

An old rag or sponge is also helpful, especially if you’re cleaning a container with a handle.

It’s a good idea to have a few other tools on hand as well, just in case you need them. You can use a rag or paper towels for the first two steps, but you may want something more absorbent for the last two steps. A sponge that you’ve cut open or an old rag cloth would work best. You should also have a bucket or tray to catch the dirty water.

The Cleaning Process

There are a few easy steps to cleaning motor oil out of plastic containers. Here’s the process:

Pour Out the Oil

The first thing you’ll want to do is pour out the oil. Be careful not to tip the container too far, since you don’t want the oil to pour out into the floor. You can pour the oil into a small container or pour it back into the car’s engine. When pouring the oil back into the car, make sure you’re careful not to spill it while pouring. If you need a little extra help, you can always use a funnel to pour the oil back into the engine.

Rinse the Container With Hot Water

After you pour out the oil, you’ll want to rinse the container with hot water. You can do this in the sink or a bucket. Make sure to fill the container with enough water that it covers the inside completely. Let the container sit for a few minutes with the water inside. You can add more water if it begins to get low. While the container sits with water inside, you can clean any extra oil off the outside of the container, like the handles and lid. You can use a rag or paper towels for this step to avoid getting water inside the containers.

Add Dish Soap and Hot Water

After you’ve rinsed out the container with hot water, you’ll want to add a few squirts of dish soap to the water-filled container. Make sure to use a squirt of soap that’s less than what’s in a normal sink full of dishes. You don’t want to add too much soap, since it can cause a lot of foaming. You can let the container sit with soap and water inside for another few minutes. While it sits, you can clean any extra oil off the outside of the container. You can also use the rag or paper towels for this step, too.

Let it Sit

After you’ve added a small amount of dish soap to the container and let it sit with water inside for a few minutes, you’ll want to let it sit for a bit longer. You can let the container sit for about 15 minutes. While you let the container sit, you can clean any extra oil off the outside of the container.

Rinse Again With Hot Water

After you’ve let the container sit with soap and water inside for 15 minutes, you’ll want to rinse it out again with hot water. You can do this in the sink or a bucket. Make sure to fill the container with enough water that it covers the inside completely. While the container sits with water inside, you can clean any extra oil off the outside of the container. You can use a rag or paper towels for this step to avoid getting water inside the containers.

Dry the Container

After you’ve rinsed the container out again with hot water, make sure to dry the inside with a paper towel or rag. You don’t want any water to be left inside, or mold could grow. You can use a rag or paper towels for the first two steps, but you may want to use a sponge for the last two steps. You can cut open a sponge and use that. When you’ve dried the container inside and out, it should be ready to be recycled! If you’re not sure where to recycle the container, check out your local recycling center. They should be able to tell you what you can recycle and where to take it.

Conclusion

There’s nothing better than cleaning motor oil out of plastic containers. Now that you know how to do it, you can recycle your used oil containers without worrying about harmful chemicals being released into the environment. Make sure to follow these steps for the best results. You can clean motor oil out of plastic containers using these three easy methods. Now that you know how, you can recycle your old containers properly and safely.

Leave a Comment