Service 4WD light on Ram 1500 usually comes on when there is an issue with the 4-wheel drive system. The light can be cleared by following these steps: 1) Turn the ignition to the “On” position, but do not start the engine. 2) Press and hold the brake pedal. 3) Press and release the “4WD” button on the instrument panel. 4) Release the brake pedal.
How To Clear Service 4Wd Light Ram 1500
There could be a few reasons why your service 4WD light is illuminated on your Ram 1500. It’s possible that you may just need to reset the system. To do this, turn off the truck, wait for 10 seconds, and turn it back on. If the light comes back on, there may be a more serious issue that needs to be addressed. You could have a problem with the transfer case, the four-wheel drive system, or another component. Bring your truck into a
– a scanner that can read fault codes – a battery charger – a tire iron – a lug wrench – WD-40 or another penetrating oil – a flat head screwdriver – a Phillips head screwdriver
- Step 2: locate the transfer case shift lever on the console
- Step 1: turn off your vehicle and pop the hood
- Step 3: pull the lever into the “neutral” position
below: 1) The first step is to identify the root cause of the problem. This can be done by reading the error code that is displayed on the service 4wd light. 2) If the error code points to a mechanical issue, then the next step is to take the vehicle to a mechanic to have it inspected and repaired. 3) If the error code is due to a system malfunction, then the next step is to reset the system by following the steps in
Frequently Asked Questions
How Do You Reset The Service Light On A 2012 Dodge Ram 2500?
There is no specific way to reset the service light on a 2012 Dodge Ram 2500. The light will generally reset itself after the truck has been serviced. If the light does not reset, then the truck may need to be serviced again.
How Do You Reset The Oil Life On A 2012 Dodge Diesel?
On a 2012 Dodge diesel, the oil life can be reset by going to the “Maint” menu and selecting “Oil Life Reset.”
How Do You Reset The Maintenance Light On A 2012 Dodge Ram?
There are a few ways to reset the maintenance light on a Dodge Ram. One way is to use the key fob. Another way is to use the odometer button.
How Do You Reset The Service Light On A 4 Wheel Drive?
There is no one definitive answer to this question. Depending on the make and model of 4 wheel drive, the procedure for resetting the service light may vary. It is advisable to consult your vehicle’s owner’s manual or consult with a qualified automotive technician if you are unsure how to reset the service light on your 4 wheel drive.
What Does Serv 4Wd Mean?
SERV 4WD stands for Selectable 4-wheel drive. It is a system that allows the driver to choose how much power is sent to each wheel. This can be useful for getting through difficult terrain or for better handling on the roads.
How Do You Reset The Oil Life On A 2012?
There is no reset button on the oil life indicator. The only way to reset it is to change the oil and reset the indicator.
How Do You Reset The Oil Light On A 2012 Gmc Sierra?
There are several ways that you can reset the oil light on a 2012 GMC Sierra. One way is to use the GMC owner’s manual. The manual provides information on how to reset the system manually. Another way to reset the oil light is to use an electronic device. There are a number of devices that are available for purchase that will allow you to reset the oil light on your vehicle.
How Do You Put A 2012 Dodge Ram In 4 Wheel Drive?
In order to put a 2012 Dodge Ram in 4 wheel drive, you must first locate the 4×4 switch. This is typically located on the dashboard near the gear shift. Once you have found the switch, flick it into the “on” position. The 4×4 system will now be engaged, and your Dodge Ram will be driving in four-wheel-drive mode.
How Do You Reset The Oil Life On A Dodge Ram?
To reset the oil life on a Dodge Ram, you will need to locate the oil life monitor. Once you have found it, press and hold the button until the light goes off.
How Do You Reset The Oil Change Light On A 2011 Dodge Ram?
On a 2011 Dodge Ram, the oil change light reset procedure is as follows: 1. Turn the ignition to the RUN position (not started). 2. Press and hold the odometer reset button until the “Oil Change” message displays. 3. Release the button and press it again. 4. The light will flash three times indicating that the reset is complete.
How Do You Reset The Oil Light On A Gmc Sierra?
There is a reset button on the instrument panel that you can use to reset the oil life monitor.
How Do You Reset The 4 Wheel Drive Light On A 2012 Dodge Ram?
If the 4-wheel drive light on your 2012 Dodge Ram is illuminated, you may need to reset the system. To do this, first make sure that the vehicle is in Park and the emergency brake is engaged. Next, turn the key to the “On” position, but do not start the engine. Then, press and hold the “4WD High” button for five seconds. The light should turn off, indicating that the system has been reset.
The service 4WD light on a Ram 1500 is cleared by turning the ignition key to the “off” position, then back to the “on” position. The light will then turn off.